Место происхождения:
Китай
Фирменное наименование:
Ruideer
Сертификация:
CE certificate, GB150, JB4732
Номер модели:
100 bar/60bar/10bar
The cemented carbide pressure sintering furnace is a single chamber and double door horizontal and periodic heating structure,which is designed for easy handling and maintenance, the whole process is controlled automatically.It can realize full load continuous operation, 300 furnace times/year or 300 working days/year.It uses graphite element resistance heating (low voltage, high current) .In addition, there are multiple heating units, each of which controls the temperature separately.It equipped with fully automatic control function and safety interlock function.The whole process is automatically controlled, monitored, tracked and recorded by computer.The PLC, industrial computer (IPC) control to realize the whole process of one-key start, real-time dynamic monitoring, computer will save temperature, pressure, vacuum and other parameters ,alarm interlocking is safe and reliable.
The equipment can be used for dewaxing of cemented carbide (vacuum Ar carrier gas dewaxing and hydrogen micro-positive pressure dewaxing), vacuum sintering, partial pressure sintering, pressure sintering, rapid cooling and other processes.It meets the strict requirement of uniformity of furnace temperature and atmosphere in sintering process of cemented carbide.
|
Service life |
6000times / 20-years service life |
|
Useful space |
≥300×300×600mm |
|
Max. Loading weight
|
100kg(It depends on sintering product and loading space) |
|
Max. Designed temp. |
1600℃(Heating temperature) |
|
Max. Working temp. |
1550℃ |
|
Max. working pressure |
≤58bar |
|
Ultimate vacuum degree |
1Pa(After heating in a cold,empty,dry condition) |
|
Pumping speed |
The vacuum degree is up to 5 Pa within 30min after starting , pump,reaching 1 Pa continually within 30min. |
|
Leakage rate (average value in 24h)
|
3pa/h(After testing ultimate vacuum,under empty cold,clean condition,test in average 24h) |
|
Wax Collection rate
|
≥98% (Argon or Nitrogen dewaxing with 10kg wax absolutely, average not more than 3 times ) |
|
Heating rate |
8°C/min (in the case of vacuum and empty furnace, the room temperature rises to 1450°C, 600°C, 1000°C, and 1200°C can be kept for 40 minutes half way) |
|
Pressuring time
|
≤20min.Time can be set(When gas source is kept around 130bar,pressurized to required pressure) |
|
Cooling time
|
≤4 hours( From 1450℃ drop to 100℃ when fully-loaded,water temperature≤30℃,50bar≤pressure≤58bar ) |
|
UPS time
|
Supply power to indicator and to control furnace when power-off, Keeping time≥60min |
|
Temp.measurement Mode
|
WRe5-26 double core single thermocouples,mutually redundant, stable and reliable |
|
Temperature control mode |
Single-zone temp. Control |
|
Input gas allowed |
Ar, N2, H2 |
Отправьте запрос непосредственно нам
